// CODE SNIPPET
5706.2.5.1.1 Pumps and Fittings
JUMP TO FULL CODE CHAPTER
Tanks with top openings only shall be equipped with a tightly and permanently attached, approved pumping device having an approved hose of sufficient length for filling vehicles, equipment or containers to be served from the tank. Either the pump or the hose shall be equipped with a padlock to its hanger to prevent tampering. An effective antisiphoning device shall be included in the pump discharge unless a self-closing nozzle is provided. Siphons or internal pressure discharge devices shall not be used.
Related Code Sections
5706.2.5.1.1 Flammable and Combustible Liquids, Pumps and Fittings
Tanks with top openings only shall be equipped with a tightly and permanently attached, approved pumping device having an approved hose ...
Georgia State Minimum Standard Fire Code > 57 Flammable and Combustible Liquids > 5706 Special Operations > 5706.2 Storage and Dispensing of Flammable and Combustible Liquids on Farms and Construction Sites > 5706.2.5 Type of Tank > 5706.2.5.1 Tanks With Top Openings Only > 5706.2.5.1.1 Pumps and Fittings
5706.2.5.1.1 Flammable and Combustible Liquids, Pumps and Fittings
Tanks with top openings only shall be equipped with a tightly and permanently attached, approved pumping device having an approved hose ...
Georgia State Minimum Fire Prevention Code > 57 Flammable and Combustible Liquids > 5706 Special Operations > 5706.2 Storage and Dispensing of Flammable and Combustible Liquids on Farms and Construction Sites > 5706.2.5 Type of Tank > 5706.2.5.1 Tanks With Top Openings Only > 5706.2.5.1.1 Pumps and Fittings
1210.5 Hydronic Piping, Fittings
Ground-source heat pump pipe fittings shall be approved for installation with the piping materials to be installed, shall conform to the standards ...
Georgia State Minimum Standard Mechanical Code > 12 Hydronic Piping > 1210 Plastic Pipe Ground-Source Heat Pump Loop Systems > 1210.5 Fittings
M2105.5 Hydronic Piping, Fittings
Ground-source heat-pump pipe fittings shall be approved for installation with the piping materials to be installed, shall conform to the standards ...
Georgia State Minimum Standard One and Two Family Dwelling Code > 21 Hydronic Piping > M2105 Ground-Source Heat-Pump System Loop Piping > M2105.5 Fittings
712.3.3 Sanitary Drainage, Discharge Pipe and Fittings
Discharge pipe and fittings serving sump pumps and ejectors shall be constructed of materials in accordance with Sections 712.3.3.1 and 712.3.3.2 ...
Georgia State Minimum Standard Plumbing Code > 7 Sanitary Drainage > 712 Sumps and Ejectors > 712.3 Sump Design > 712.3.3 Discharge Pipe and Fittings