// CODE SNIPPET
602.3.5.1 Pump Enclosure
JUMP TO FULL CODE CHAPTER
The pump room or enclosure around a well pump shall be drained and protected from freezing by heating or other approved means. Where pumps are installed in basements, such pumps shall be mounted on a block or shelf not less than 18 inches (457 mm) above the basement floor. Well pits shall be prohibited.
Related Code Sections
602.3.5.1 Water Supply and Distribution, Pump Enclosure
The pump room or enclosure around a well pump shall be drained and protected from freezing by heating or other approved means. Where pumps ...
Plumbing Code 2018 of Kansas > 6 Water Supply and Distribution > 602 Water Required > 602.3 Individual Water Supply > 602.3.5 Pumps > 602.3.5.1 Pump Enclosure
(I) Special Equipment, Junction Boxes
box shall be securely mounted. [ 20: 9.7(1)] Mounting and installing of a junction box shall not violate the enclosure type rating of the fire pump ...
National Electrical Code 2017 of Kansas > 6 Special Equipment > 695 Fire Pumps > 695.6 Power Wiring > (I) Junction Boxes
3002.9 Elevators and Conveying Systems, Plumbing and Mechanical Systems
Plumbing and mechanical systems shall not be located in an elevator hoistway enclosure. Exception: Floor drains, sumps and sump pumps shall ...
Building Code 2018 of Kansas > 30 Elevators and Conveying Systems > 3002 Hoistway Enclosures > 3002.9 Plumbing and Mechanical Systems
502.9.5.5.1 Exhaust Systems, General
Ventilation shall be provided for rooms, buildings and enclosures in which Class I liquids are pumped, used or transferred. Design of ventilation ...
Mechanical Code 2018 of Kansas > 5 Exhaust Systems > 502 Required Systems > 502.9 Hazardous Materials—Requirements for Specific Materials > 502.9.5 Flammable and Combustible Liquids > 502.9.5.5 Bulk Plants or Terminals > 502.9.5.5.1 General
Section 426 Fixtures, Faucets and Fixture Fittings, Whirlpool Bathtubs
of the circulation pump. Doors within a whirlpool enclosure ...