// CODE SNIPPET
712.3.5 Pump Connection to the Drainage System
JUMP TO FULL CODE CHAPTER
Pumps connected to the drainage system shall connect to a building sewer, building drain, soil stack, waste stack or horizontal branch drain. Where the discharge line connects into horizontal drainage piping, the connection shall be made through a wye fitting into the top of the drainage piping and such wye fitting shall be located not less than 10 pipe diameters from the base of any soil stack, waste stack or fixture drain.
Related Code Sections
712.3.5 Sanitary Drainage, Pump Connection to the Drainage System
Pumps connected to the drainage system shall connect to a building sewer , building drain , soil stack , waste stack or horizontal branch drain ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 712 Sumps and Ejectors > 712.3 Sump Design > 712.3.5 Pump Connection to the Drainage System
P3007.3.5 Sanitary Drainage, Ejector Connection to the Drainage System
Pumps connected to the drainage system shall connect to a building sewer, building drain ,soil stack, waste stack or horizontal branch drain.Where ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3007 Sumps and Ejectors > P3007.3 Sump Design > P3007.3.5 Ejector Connection to the Drainage System
Chapter 7 Sanitary Drainage
water closets, bathing, culinary activities and equipment discharges. The types of materials, drainage fitting and the connection methods are covered ...
Section 307 General Regulations, (IFGC) Condensate Disposal
Condensate drainage systems shall be provided for equipment and appliances containing evaporators and cooling coils in accordance ...
1113.1 Storm Drainage, Pumping System
The sump pump, pit and discharge piping shall conform to Sections 1113.1.1 through 1113.1.4 ...
Plumbing Code 2018 of Kansas > 11 Storm Drainage > 1113 Sumps and Pumping Systems > 1113.1 Pumping System