// CODE SNIPPET
1910.179(a)(10) Pulpit-Operated Crane
JUMP TO FULL CODE CHAPTER
A pulpit-operated crane is a crane operated from a fixed operator station not attached to the crane.
Related Code Sections
1910.179(a)(10) Materials Handling and Storage, Pulpit-Operated Crane
A pulpit-operated crane is a crane operated from a fixed operator station not attached to the crane ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(a) Definitions Applicable to This Section > 1910.179(a)(10) Pulpit-Operated Crane
1910.179 Materials Handling and Storage, Overhead and Gantry Cranes
A pulpit-operated crane is a crane operated from a fixed operator ...
1910.261(c)(8) Special Industries, Cranes
[Reserved] A crane shall not be operated where any ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(c) Handling and Storage of Pulpwood and Pulp Chips > 1910.261(c)(8) Cranes
1910.179(a)(2) Materials Handling and Storage, Automatic Crane
An automatic crane is a crane which when activated operates through a preset cycle or cycles ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(a) Definitions Applicable to This Section > 1910.179(a)(2) Automatic Crane
1910.180(a)(3) Materials Handling and Storage, Truck Crane
A truck crane consists of a rotating superstructure with powerplant, operating machinery and boom, mounted on an automotive truck equipped ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.180 Crawler Locomotive and Truck Cranes > 1910.180(a) Definitions Applicable to This Section > 1910.180(a)(3) Truck Crane