UpCodes logo
Go To Full Code Chapter
The output cable to the primary pad shall be secured in place over its entire length for the purpose of restricting its movement and to prevent strain at the connection points. If installed in conditions where drive-over could occur, the cable shall be provided with supplemental protection. Where the charger power converter is a part of the primary pad assembly, the power supply cord to the primary pad shall also be protected.

Related Code Sections

(D) Special Equipment, Protection of the Output Cable
The output cable to the primary pad shall be secured in place over its entire length for the purpose of restricting its movement and to prevent ...
(E) Communications Systems, Output Circuits
circuits — Part V of Article 820 Exception: Where protection is provided in the output of the NIU 830.90(B)(3) shall apply. Installations of optical ...
690.11 Special Equipment, Arc-Fault Circuit Protection (Direct Current)
output circuits and dc-to-dc converter output circuits that are direct buried, installed in metallic raceways, or installed in enclosed metallic cable ...
(E) Communications Systems, Output Circuits
As appropriate for the services provided, the output circuits derived from the network terminal shall comply with the requirements of the following ...
(C) Special Occupancies, Cable Protection
Cables shall be protected by bushings where they pass through enclosures and shall be arranged so that tension on the cable is not transmitted ...