// CODE SNIPPET
2207.1.1 Protection of Steel Cables
JUMP TO FULL CODE CHAPTER
The minimum protection of all wires or strands used in building structures shall be a class "A" coating as defined in ASTM A 586 and A 603, whether the cable is used on the interior or exterior.
Related Code Sections
2207.1.1 Steel, Protection of Steel Cables
The minimum protection of all wires or strands used in building structures shall be a class "A" coating as defined in ASTM A 586 and A 603, whether ...
NYC Building Code 2008 > 22 Steel > 2207 Steel Cable Structures > 2207.1 General > 2207.1.1 Protection of Steel Cables
2207.1 Steel, General
The design, fabrication and erection including related connections, and protective coatings of steel cables for buildings shall be in accordance ...
Article 14 Elevators [PDF] (page 74)
are exposed to corrosive elements, such suspension means shall be provided with an approved protective covering. c. Where steel cable is used ...
3308.5.3 Safeguards During Construction or Demolition, Cables
Vertical safety netting shall be secured to noncorrosive wire cable capable of withstanding a load of at least 200 pounds (90.7 kg) applied in any ...
NYC Building Code 2014 > 33 Safeguards During Construction or Demolition > 3308 Protection of Unenclosed Perimeters > 3308.5 Vertical Safety Netting Systems > 3308.5.3 Cables
2205.6 Steel, Fabrication, Erection and Quality Control
and handled in a manner that will not cause injury to protective coatings or permanent deformations of the members. Structural steel members shall ...
NYC Building Code 2008 > 22 Steel > 2205 Structural Steel > 2205.6 Fabrication, Erection and Quality Control