// CODE SNIPPET
1910.158(b) Protection of Standpipes
JUMP TO FULL CODE CHAPTER
The employer shall assure that standpipes are located or otherwise protected against mechanical damage. Damaged standpipes shall be repaired promptly.
Related Code Sections
1910.158(b) Fire Protection, Protection of Standpipes
The employer shall assure that standpipes are located or otherwise protected against mechanical damage. Damaged standpipes shall be repaired promptly ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(b) Protection of Standpipes
1910.158(c)(2) Fire Protection, Hose Outlets and Connections
The employer shall assure that hose outlets and connections are located high enough above the floor to avoid being obstructed and to be accessible ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(c) Equipment > 1910.158(c)(2) Hose Outlets and Connections
1910.158(c)(3) Fire Protection, Hose
). Standpipe systems installed after January 1, 1981, for use ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(c) Equipment > 1910.158(c)(3) Hose
1910.158(c)(4) Fire Protection, Nozzles
The employer shall assure that standpipe hose is equipped with shut-off type nozzles ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(c) Equipment > 1910.158(c)(4) Nozzles
1910.158(a)(1) Fire Protection, Scope
This section applies to all small hose, Class II, and Class III standpipe systems installed to meet the requirements of a particular OSHA standard ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(a) Scope and Application > 1910.158(a)(1) Scope