// CODE SNIPPET
1107.1.1 Protection of Refrigerant Piping Located Inside Buildings
Related Code Sections
1107.1.1 Refrigeration, Protection of Refrigerant Piping Located Inside Buildings
All refrigerant piping and fittings installed at a height less than 7 feet 3 inches (2210 mm) above the floor shall be concealed or otherwise ...
NYC Mechanical Code 2014 > 11 Refrigeration > 1107 Refrigerant Piping > 1107.1 General > 1107.1.1 Protection of Refrigerant Piping Located Inside Buildings
1107.3 Refrigeration, Condensation
All refrigerating piping and fittings, brine piping and fittings that, during normal operation, will reach a surface temperature below the dew point ...
Reference Standard 13 Mechanical Ventilation, Air Conditioning, and Refrigeration Systems [PDF] (page 22)
an open space that affords passageway in any building shall not be less than [7.25 ft (2.2m)] 7.50 ft (2.3 m) above the floor unless the piping is located ...
NYC 1968 Code (Vol II) [PDF] > Reference Standard 13 Mechanical Ventilation, Air Conditioning, and Refrigeration Systems
1107.2.3 Refrigeration, Refrigerant Piping Penetrations
duct or shaft with openings to those floors served by the refrigeration system; or Located on the exterior of the building where vented ...
NYC Mechanical Code 2014 > 11 Refrigeration > 1107 Refrigerant Piping > 1107.2 Piping Location > 1107.2.3 Refrigerant Piping Penetrations
1305.11.1 Fuel-Oil Piping and Storage, Inside of Buildings
the lowest floor inside of a building shall be limited to 330 gallons (1249 L) per story. The maximum quantity shall include oversized piping as described ...
NYC Mechanical Code 2008 > 13 Fuel-Oil Piping and Storage > 1305 Fuel-Oil System Installation > 1305.11 Limitations on Quantities of Fuel-Oil Storage > 1305.11.1 Inside of Buildings