// CODE SNIPPET
545.8 Protection of Conductors and Equipment
Related Code Sections
545.8 Special Occupancies, Protection of Conductors and Equipment
Protection shall be provided for exposed conductors and equipment during processes of manufacturing, packaging, in transit, and erection ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 545 Manufactured Buildings and Relocatable Structures > 545.8 Protection of Conductors and Equipment
240.1 Wiring and Protection, Scope
than 1000 volts, nominal. Part IX covers overcurrent protection over 1000 volts, nominal. Informational Note: Overcurrent protection for conductors ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.1 Scope
(1) Equipment for General Use, Use
Where fuses are used to protect conductors and equipment, a fuse shall be placed in each ungrounded conductor. Two power fuses shall be permitted ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.21 Circuit-Interrupting Devices > (B) Power Fuses and Fuseholders > (1) Use
(B) Equipment for General Use, Output Conductors
Protection," the conductor between the power conversion equipment and the motor shall have an ampacity equal to or greater than the larger of: 125 ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.122 Conductors — Minimum Size and Ampacity > (B) Output Conductors
(1) Special Equipment, Equipment Grounding
shall not be required to be connected to the equipment grounding conductor where, protected by a system of double insulation or its equivalent. Double ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 600 Electric Signs and Outline Lighting > 600.7 Grounding and Bonding > (A) Grounding > (1) Equipment Grounding