// CODE SNIPPET
10.4.2.2 Protection From Mechanical Damage
JUMP TO FULL CODE CHAPTER
The depth of cover for private fire service mains and their appurtenances to protect against mechanical damage shall be in accordance with 10.4.2.2.3. [24:10.4.2.2]
The depth of piping shall be measured from the top of the piping to the final grade. [24:10.4.2.2.1]
In locations where freezing is not a factor, the depth of cover shall not be less than 30 in. (0.8 m) below grade to prevent mechanical damage. [24:10.4.2.2.2]
Where listed piping is used and the bury depth differs from this standard, the listing limitations shall apply. [24:10.4.2.2.2.1]
Private fire service mains installed under driveways or roadways shall be buried at a minimum depth of 3 ft (900 mm). [24:10.4.2.2.3]
Sidewalks, walkways and other paved or concrete pedestrian passageways shall not be required to comply with 10.4.2.2.3. [24:10.4.2.2.3.1]
Private fire service mains installed under railroad tracks shall be buried at a minimum depth of 4 ft (1.2 m). [24:10.4.2.2.4]
Where railroad operators require a greater depth of bury, the greater depth shall apply. [24:10.4.2.2.4.1]
Private fire service mains installed under large piles of heavy commodities or subject to heavy shock and vibrations shall be buried at a minimum depth of 4 ft (1.2 m). [24:10.4.2.2.5]
Where private fire service mains are installed above ground, they shall be protected with bollards or other means as approved by the AHJ when subject to mechanical damage. [24:10.4.2.2.6]
Related Code Sections
10.4.2.2 Underground Requirements, Protection From Mechanical Damage
The depth of cover for private fire service mains and their appurtenances to protect against mechanical damage shall be in accordance with 10.4.2.2.3 ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 10 Underground Requirements > 10.4 Protection of Private Fire Service Mains. [24:10.4] > 10.4.2* Protection of Piping. [24:10.4.2] > 10.4.2.2 Protection From Mechanical Damage
10.4.2.2.3.1 Underground Requirements,
Sidewalks, walkways and other paved or concrete pedestrian passageways shall not be required to comply with 10.4.2.2.3. [ 24: 10.4.2.2.3.1 ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 10 Underground Requirements > 10.4 Protection of Private Fire Service Mains. [24:10.4] > 10.4.2* Protection of Piping. [24:10.4.2] > 10.4.2.2 Protection From Mechanical Damage > 10.4.2.2.3 > 10.4.2.2.3.1
10.4.2.2.4 Underground Requirements,
Private fire service mains installed under railroad tracks shall be buried at a minimum depth of 4 ft (1.2 m). [ 24: 10.4.2.2.4 ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 10 Underground Requirements > 10.4 Protection of Private Fire Service Mains. [24:10.4] > 10.4.2* Protection of Piping. [24:10.4.2] > 10.4.2.2 Protection From Mechanical Damage > 10.4.2.2.4
10.4.2.2.4.1 Underground Requirements,
Where railroad operators require a greater depth of bury, the greater depth shall apply. [ 24: 10.4.2.2.4.1 ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 10 Underground Requirements > 10.4 Protection of Private Fire Service Mains. [24:10.4] > 10.4.2* Protection of Piping. [24:10.4.2] > 10.4.2.2 Protection From Mechanical Damage > 10.4.2.2.4 > 10.4.2.2.4.1
10.4.2.2.5 Underground Requirements,
Private fire service mains installed under large piles of heavy commodities or subject to heavy shock and vibrations shall be buried at a minimum ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 10 Underground Requirements > 10.4 Protection of Private Fire Service Mains. [24:10.4] > 10.4.2* Protection of Piping. [24:10.4.2] > 10.4.2.2 Protection From Mechanical Damage > 10.4.2.2.5