// CODE SNIPPET
1926.307(c)(4) "Projecting Shafts Ends"
Go To Full Code Chapter
1926.307(c)(4)(i)
Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves.
1926.307(c)(4)(ii)
Unused keyways shall be filled up or covered.
Upcodes Diagrams
Related Code Sections
1926.307(c)(4) Tools - Hand and Power, "Projecting Shafts Ends"
Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded ...
1926.307(c)(4)(i) Tools - Hand and Power,
Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded ...
1926.307(c) Tools - Hand and Power, "Shafting"
shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft ...
1926.307 Tools - Hand and Power, Mechanical Power-Transmission Apparatus
Projecting shaft ends shall present a smooth edge ...