// CODE SNIPPET
1309.10.3 Prohibited Brazed Joints
JUMP TO FULL CODE CHAPTER
Joints exhibiting the following conditions shall not be permitted:
- Flux or flux residue (when flux or flux-coated BAg series rods are used with dissimilar metals).
- Base metal melting or erosion.
- Unmelted filler metal.
- Failure of the filler metal to be clearly visible all the way around the joint at the interface between the socket and the tube.
- Cracks in the tube or component.
- Cracks in the braze filler metal.
- Failure of the joint to hold the test pressure under the installer-performed initial pressure test (see Section 1318.5, Section 1318.6 or Section 1318.7) and standing pressure test (see Section 1318.9, Section 1318.10 or Section 1318.13). [NFPA 99:5.1.10.4.7.4]
Related Code Sections
1309.10.3 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Prohibited Brazed Joints
the joint at the interface between the socket and the tube. Cracks in the tube or component. Cracks in the braze filler metal. Failure of the joint ...
2018 Uniform Plumbing Code of Nevada > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1309.0 Joints and Connections > 1309.10 Inspection of Brazed Joints > 1309.10.3 Prohibited Brazed Joints
605.1.1 Water Supply and Distribution, Brazed Joints
Brazed joints between copper or copper alloy pipe or tubing and fittings shall be made with brazing alloys having a liquid temperature above 1000°F ...
2018 Uniform Plumbing Code of Nevada > 6 Water Supply and Distribution > 605.0 Joints and Connections > 605.1 Copper or Copper Alloy Pipe, Tubing, and Joints > 605.1.1 Brazed Joints
705.3.1 Sanitary Drainage, Brazed Joints
Brazed joints between copper or copper alloy pipe and fittings shall be made with brazing alloys having a liquid temperature above 1000°F (538°C ...
2018 Uniform Plumbing Code of Nevada > 7 Sanitary Drainage > 705.0 Joints and Connections > 705.3 Copper or Copper Alloy Pipe (DWV) and Joints > 705.3.1 Brazed Joints
P3003.10.1 Sanitary Drainage, Brazed Joints
All joint surfaces shall be cleaned. An approved flux shall be applied where required. The joint shall be brazed with a filler metal conforming ...
Residential Code 2012 of Nevada > 30 Sanitary Drainage > P3003 Joints and Connections > P3003.10 Copper Pipe > P3003.10.1 Brazed Joints
P3003.6.1 Sanitary Drainage, Brazed Joints
All joint surfaces shall be cleaned. An approved flux shall be applied where required. Brazing materials shall have a melting point in excess ...
Residential Code 2018 of Nevada > 30 Sanitary Drainage > P3003 Joints and Connections > P3003.6 Copper and Copper-Alloy Pipe and Tubing > P3003.6.1 Brazed Joints