// CODE SNIPPET
R403.1.2 Programmable Thermostat (Prescriptive)
JUMP TO FULL CODE CHAPTER
The thermostat controlling the primary heating or cooling system of the dwelling unit shall be capable of controlling the heating and cooling system on a daily schedule to maintain different temperature set points at different times of the day. This thermostat shall include the capability to set back or temporarily operate the system to maintain zone temperatures down to 55°F (13°C) or up to 85°F (29°C). The thermostat shall initially be programmed by the manufacturer with a heating temperature set point no higher than 70°F (21°C) and a cooling temperature set point no lower than 78°F (26°C).
Related Code Sections
R403.1.2 [RE] Residential Energy Efficiency, Programmable Thermostat (Prescriptive)
Where the primary heating system is a forced-air furnace, at least one thermostat per dwelling unit shall be capable of controlling the heating ...
2014 FBC - Energy Conservation, 5th edition > 4 [RE] Residential Energy Efficiency > R403 Systems > R403.1 Controls > R403.1.2 Programmable Thermostat (Prescriptive)
R403.1.2 [RE] Residential Energy Efficiency, Programmable Thermostat (Prescriptive)
The thermostat controlling the primary heating or cooling system of the dwelling unit shall be capable of controlling the heating and cooling system ...
2017 FBC - Energy Conservation, 6th edition > 4 [RE] Residential Energy Efficiency > R403 Systems > R403.1 Controls > R403.1.2 Programmable Thermostat (Prescriptive)
R403.1.2 [RE] Residential Energy Efficiency, Programmable Thermostat (Prescriptive)
The thermostat controlling the primary heating or cooling system of the dwelling unit shall be capable of controlling the heating and cooling system ...
2020 FBC - Energy Conservation, 7th edition > 4 [RE] Residential Energy Efficiency > R403 Systems > R403.1 Controls > R403.1.2 Programmable Thermostat (Prescriptive)
R104.2.4 [RE] Scope and Administration, Mechanical Rough-In Inspection
equipment type and size, required controls, system insulation and corresponding R -value, system air leakage control, programmable thermostats, dampers ...
2017 FBC - Energy Conservation, 6th edition > 1 [RE] Scope and Administration > R104 Inspections > R104.2 Required Inspections > R104.2.4 Mechanical Rough-In Inspection
R104.2.4 [RE] Scope and Administration, Mechanical Rough-In Inspection
equipment type and size, required controls, system insulation and corresponding R -value, system air leakage control, programmable thermostats, dampers ...
2020 FBC - Energy Conservation, 7th edition > 1 [RE] Scope and Administration > R104 Inspections > R104.2 Required Inspections > R104.2.4 Mechanical Rough-In Inspection