// CODE SNIPPET
3308.1 Program Development and Maintenance
JUMP TO FULL CODE CHAPTER
The owner or owner's authorized agent shall be responsible for the development, implementation and maintenance of a written plan establishing a fire prevention program at the project site applicable throughout all phases of the construction, repair, alteration or demolition work. The plan shall address the requirements of this chapter and other applicable portions of this code, the duties of staff, and staff training requirements. The plan shall be made available for review by the fire code official upon request.
Related Code Sections
3303.1 Fire Safety During Construction and Demolition, Program Development and Maintenance
The owner or owner's authorized agent shall be responsible for the development, implementation and maintenance of an approved , written ...
Fire Code 2021 of Colorado > 33 Fire Safety During Construction and Demolition > 3303 Owner's Responsibility for Fire Protection > 3303.1 Program Development and Maintenance
3308.1 Fire Safety During Construction and Demolition, Program Development and Maintenance
The owner or owner's authorized agent shall be responsible for the development, implementation and maintenance of a written plan establishing ...
Fire Code 2018 of Colorado > 33 Fire Safety During Construction and Demolition > 3308 Owner's Responsibility for Fire Protection > 3308.1 Program Development and Maintenance
706.7 Special Conditions, Maintenance
equipment maintenance and developing an effective electrical preventive maintenance (EPM) program, see NFPA 70B-2019, Recommended Practice for Electrical ...
National Electrical Code 2020 of Colorado > 7 Special Conditions > 706 Energy Storage Systems > 706.7 Maintenance
(A) Special Conditions, Commissioning Plan
A commissioning plan shall be developed and documented. Informational Note: For further information on developing a commissioning program see NFPA ...
National Electrical Code 2020 of Colorado > 7 Special Conditions > 708 Critical Operations Power Systems (COPS) > 708.8 Commissioning > (A) Commissioning Plan
8.10.1.6 General Requirements, Maintenance Control Program
The Maintenance Control Program complying with 8.6.1.2.1 shall be available at the time of inspection. On-site equipment documentation complying ...
Safety Code for Elevators and Escalators 2013 of Colorado > 8 General Requirements > 8.10 Acceptance Inspections and Tests > 8.10.1 General Requirements for Acceptance Inspections and Tests > 8.10.1.6 Maintenance Control Program