// CODE SNIPPET
R606.1.1 Professional Registration Not Required
JUMP TO FULL CODE CHAPTER
Where the empirical design provisions of Appendix A of TMS 402, the provisions of TMS 403, or the provisions of this section are used to design masonry, project drawings, typical details and specifications are not required to bear the seal of the architect or engineer responsible for design, unless otherwise required by the state law of the jurisdiction having authority.
Related Code Sections
R606.1.1 Wall Construction, Professional Registration Not Required
masonry, project drawings, typical details and specifications are not required to bear the seal of the architect or engineer responsible for design, unless ...
Residential Code 2018 of Kansas > 6 Wall Construction > R606 General Masonry Construction > R606.1 General > R606.1.1 Professional Registration Not Required
3.3.235 Definitions, Registered Design Professional (RDP)
of the professional registration laws of the state or jurisdiction in which the project is to be constructed. (SAF-FUN) ...
Life Safety Code 2018 of Kansas > 3 Definitions > 3.3 General Definitions > 3.3.235 Registered Design Professional (RDP)
E3401.3 General Requirements, Not Covered
Chapters 34 through 43 do not cover the following: Installations, including associated lighting, under the exclusive control of communications ...
(A) Special Occupancies, Not Covered
A recreational vehicle not used for the purposes as defined in 551.2 shall not be required to meet the provisions of Part IV pertaining to the number ...
National Electrical Code 2017 of Kansas > 5 Special Occupancies > 551 Recreational Vehicles and Recreational Vehicle Parks > 551.4 General Requirements > (A) Not Covered
(C) Special Conditions, Not Functioning
To indicate that the battery charger is not functioning. Informational Note: For signals for generator sets, see NFPA 110-2013, Standard ...
National Electrical Code 2017 of Kansas > 7 Special Conditions > 701 Legally Required Standby Systems > 701.6 Signals > (C) Not Functioning