// CODE SNIPPET
1926.1413(a)(2)(iii)(B) Prior Electrical Contact With a Power Line
Related Code Sections
1926.1413(a)(2)(iii)(B) Cranes & Derricks in Construction, Prior Electrical Contact With a Power Line
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1413 Wire Rope--Inspection > 1926.1413(a) Shift Inspection > 1926.1413(a)(2) Apparent Deficiencies > 1926.1413(a)(2)(iii) Category III > 1926.1413(a)(2)(iii)(B) Prior Electrical Contact With a Power Line
1926.964 Electric Power Transmission and Distribution, Overhead Lines and Live-Line Barehand Work
to minimize the possibility that conductors and cables the employees are installing or removing will contact energized power lines or equipment ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.964 Overhead Lines and Live-Line Barehand Work
1926.416(a) Electrical, Protection of Employees
No employer shall permit an employee to work in such proximity to any part of an electric power circuit that the employee could contact the electric ...
OSHA 1926 Construction > K Electrical > 1926.416 General Requirements > 1926.416(a) Protection of Employees
1926.1411(b) Cranes & Derricks in Construction, The Employer Must Ensure That:
will get closer than 20 feet to the power line, the employer must ensure that a dedicated spotter who is in continuous contact with the driver/operator ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1411 Power Line Safety-While Traveling Under or Near Power Lines With No Load > 1926.1411(b) The Employer Must Ensure That:
1926.1410(c)(1) Cranes & Derricks in Construction,
The power line owner/operator or registered professional engineer who is a qualified person with respect to electrical power transmission ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1410 Power Line Safety (All Voltages)--Equipment Operations Closer Than the Table A Zone > 1926.1410(c) Minimum Clearance Distance > 1926.1410(c)(1)