// CODE SNIPPET
[BF] 1705.14.6.3 Primer, Paint and Encapsulant Bond Tests
JUMP TO FULL CODE CHAPTER
Bond tests to qualify a primer, paint or encapsulant shall be conducted where the sprayed fire-resistant material is applied to a primed, painted or encapsulated surface for which acceptable bond-strength performance between these coatings and the fire-resistant material has not been determined. A bonding agent approved by the SFRM manufacturer shall be applied to a primed, painted or encapsulated surface where the bond strengths are found to be less than required values.
Related Code Sections
1705.14.6.3 Special Inspections and Tests, Primer, Paint and Encapsulant Bond Tests
Bond tests to qualify a primer, paint or encapsulant shall be conducted where the sprayed fire-resistant material is applied to a primed, painted ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.14 Sprayed Fire-Resistant Materials > 1705.14.6 Bond Strength > 1705.14.6.3 Primer, Paint and Encapsulant Bond Tests
704.13.3.2 Fire and Smoke Protection Features, Primers, Paints and Encapsulants
Where the SFRM is to be applied over primers, paints or encapsulants other than those specified in the listing, the material shall be field tested ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 704 Fire-Resistance Rating of Structural Members > 704.13 Sprayed Fire-Resistant Materials (SFRM) > 704.13.3 Substrate Condition > 704.13.3.2 Primers, Paints and Encapsulants
Section 704 Fire and Smoke Protection Features, Fire-Resistance Rating of Structural Members
in the listing, the material shall be field tested in accordance with ASTM E736. Where testing of the SFRM with primers, paints or encapsulants demonstrates ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 704 Fire-Resistance Rating of Structural Members
(1) Special Equipment, Conductive Pool Shells
structural reinforcing steel shall be bonded together by steel tie wires or the equivalent. Where structural reinforcing steel is encapsulated ...
National Electrical Code 2017 of Illinois > 6 Special Equipment > 680 Swimming Pools, Fountains, and Similar Installations > 680.26 Equipotential Bonding > (B) Bonded Parts > (1) Conductive Pool Shells
(B) Special Equipment, Bonded Parts
is encapsulated with a nonconductive compound, the reinforcing steel shall not be required to be bonded ...
National Electrical Code 2017 of Illinois > 6 Special Equipment > 680 Swimming Pools, Fountains, and Similar Installations > 680.26 Equipotential Bonding > (B) Bonded Parts