UpCodes logo
Go To Full Code Chapter
A pressure vacuum breaker backflow prevention assembly consists of a loaded air inlet valve, an internally loaded check valve, two properly located test cocks, and two isolation valves. This device shall be permitted to be installed indoors where provisions for spillage are provided.

Related Code Sections

P2902.3 Water Supply and Distribution, Backflow Protection
Sizes 2" — 16" ASSE 1048 Pressure vacuum breaker assembly High or low hazard Backsiphonage only Sizes 1/2" — 2" ASSE 1020, CSA B64.1.2 ...
603.5.1 Water Supply and Distribution, Atmospheric Vacuum Breaker
Water closet and urinal flushometer valves shall be protected against backflow by an approved backflow prevention assembly, device, or method. Where ...