// CODE SNIPPET
605.1.3.2 Press-Connect Fittings
JUMP TO FULL CODE CHAPTER
Press-connect fittings for copper or copper alloy pipe or tubing shall have an elastomeric o-ring that forms the joint. The pipe or tubing shall be fully inserted into the fitting, and the pipe or tubing marked at the shoulder of the fitting. Pipe or tubing shall be cut square, chamfered, and reamed to full inside diameter. The fitting alignment shall be checked against the mark on the pipe or tubing to ensure the pipe or tubing is inserted into the fitting. The joint shall be pressed using the tool recommended by the manufacturer.
Related Code Sections
605.1.3.2 Water Supply and Distribution, Press-Connect Fittings
Press-connect fittings for copper or copper alloy pipe or tubing shall have an elastomeric o-ring that forms the joint. The pipe or tubing shall ...
2018 Uniform Plumbing Code of Nevada > 6 Water Supply and Distribution > 605.0 Joints and Connections > 605.1 Copper or Copper Alloy Pipe, Tubing, and Joints > 605.1.3 Mechanical Joints > 605.1.3.2 Press-Connect Fittings
G2414.10.1 Fuel Gas, (403.10.1) Pipe Joints
Schedule 40 and heavier pipe joints shall be threaded, flanged, brazed, welded or assembled with press-connect fittings listed in accordance ...
Residential Code 2018 of Nevada > 24 Fuel Gas > G2414 (403) Piping Materials > G2414.10 (403.10) Metallic Piping Joints and Fittings > G2414.10.1 (403.10.1) Pipe Joints
P2906.19 Water Supply and Distribution, Press-Connected Joints
be cleaned. The tube shall be fully inserted into the press-connected fitting. Press-connected joints shall be pressed with a tool certified ...
Residential Code 2018 of Nevada > 29 Water Supply and Distribution > P2906 Materials, Joints and Connections > P2906.19 Press-Connected Joints
705.7.1 Sanitary Drainage, Mechanical Joints
Mechanical joints between stainless steel pipe and fittings shall be of the compression, grooved coupling, hydraulic press-connect fittings ...
2018 Uniform Plumbing Code of Nevada > 7 Sanitary Drainage > 705.0 Joints and Connections > 705.7 Stainless Steel Pipe and Joints > 705.7.1 Mechanical Joints
G2414.10.2 Fuel Gas, (403.10.2) Tubing Joints
) or made with press-connect fittings complying with ANSI LC-4. Brazing alloys shall not contain more than 0.05-percent phosphorus ...
Residential Code 2012 of Nevada > 24 Fuel Gas > G2414 (403) Piping Materials > G2414.10 (403.10) Metallic Piping Joints and Fittings > G2414.10.2 (403.10.2) Tubing Joints