// CODE SNIPPET
R502.1.1 Preservative-Treated Lumber
JUMP TO FULL CODE CHAPTER
Preservative treated dimension lumber shall also be identified as required by Section R317.2.
Related Code Sections
R502.1.1 Floors, Preservative-Treated Lumber
Preservative treated dimension lumber shall also be identified as required by Section R317.2 ...
Residential Code 2009 of Pennsylvania > 5 Floors > R502 Wood Floor Framing > R502.1 Identification > R502.1.1 Preservative-Treated Lumber
R502.1.1.1 Floors, Preservative-Treated Lumber
Preservative treated dimension lumber shall also be identified as required by Section R317.2 ...
Residential Code 2015 of Pennsylvania > 5 Floors > R502 Wood Floor Framing > R502.1 General > R502.1.1 Sawn Lumber > R502.1.1.1 Preservative-Treated Lumber
R317.2.1 Building Planning, Required Information
The required quality mark on each piece of pressure-preservative-treated lumber or plywood shall contain the following information ...
Residential Code 2015 of Pennsylvania > 3 Building Planning > R317 Protection of Wood and Wood-Based Products Against Decay > R317.2 Quality Mark > R317.2.1 Required Information
R317.2 Building Planning, Quality Mark
Lumber and plywood required to be pressure-preservative-treated in accordance with Section R318.1 shall bear the quality mark of an approved ...
Residential Code 2009 of Pennsylvania > 3 Building Planning > R317 Protection of Wood and Wood Based Products Against Decay > R317.2 Quality Mark
R406.3.2 Foundations, Below-Grade Moisture Barrier
to the sheathing to form a seal. Film areas at grade level shall be protected from mechanical damage and exposure by a pressure preservatively treated lumber ...
Residential Code 2009 of Pennsylvania > 4 Foundations > R406 Foundation Waterproofing and Dampproofing > R406.3 Dampproofing for Wood Foundations > R406.3.2 Below-Grade Moisture Barrier