// CODE SNIPPET
1905.7 Preparation of Equipment and Place of Deposit
Related Code Sections
1905.7 Concrete, Preparation of Equipment and Place of Deposit
Prior to concrete being placed, the space to receive the concrete and the equipment used to deposit it shall comply with ACI 318, Section 5.7 ...
Building Code 2009 of Alabama > 19 Concrete > 1905 Concrete Quality, Mixing and Placing > 1905.7 Preparation of Equipment and Place of Deposit
R504.2 Floors, Site Preparation
of gravel having a maximum size of 3 / 4 inch (19.1 mm) or crushed stone having a maximum size of 1 / 2 inch (12.7 mm) shall be placed over ...
Residential Code 2015 of Alabama > 5 Floors > R504 Pressure Preservative-Treated Wood Floors (On Ground) > R504.2 Site Preparation
1205.1.5.3 Dry Cleaning, Lint
Lint and refuse shall be removed from traps daily, deposited in approved waste cans, removed from the premises, and disposed of safely. At all ...
Fire Code 2009 of Alabama > 12 Dry Cleaning > 1205 Operating Requirements > 1205.1 General > 1205.1.5 Equipment Maintenance and Housekeeping > 1205.1.5.3 Lint
2105.1.5.3 Dry Cleaning, Lint
Lint and refuse shall be removed from traps daily, deposited in approved waste cans, removed from the premises, and disposed of safely. At all ...
Fire Code 2015 of Alabama > 21 Dry Cleaning > 2105 Operating Requirements > 2105.1 General > 2105.1.5 Equipment Maintenance and Housekeeping > 2105.1.5.3 Lint
R506.2 Floors, Site Preparation
be placed on the prepared subgrade where the slab is below grade .
Exception: A base course is not required where the concrete slab is installed ...
Residential Code 2015 of Alabama > 5 Floors > R506 Concrete Floors (On Ground) > R506.2 Site Preparation