// CODE SNIPPET
E102.1 Preliminary
JUMP TO FULL CODE CHAPTER
Obtain the necessary information regarding the minimum daily static service pressure in the area where the building is to be located. If the building supply is to be metered, obtain information regarding friction loss relative to the rate of flow for meters in the range of sizes likely to be used. Friction loss data can be obtained from most manufacturers of water meters.
Related Code Sections
E102.1 Sizing of Water Piping System, Preliminary
Obtain the necessary information regarding the minimum daily static service pressure in the area where the building is to be located. If the building ...
NYC Plumbing Code 2014 > E Sizing of Water Piping System > E102 Information Required > E102.1 Preliminary
E102.1 Sizing of Water Piping System, Preliminary
Obtain the necessary information regarding the minimum daily static service pressure in the area where the building is to be located. If the building ...
NYC Plumbing Code 2008 > E Sizing of Water Piping System > E102 Information Required > E102.1 Preliminary
*§28-116.2.1 Administration, Preliminary Inspection
an application has been filed. The department shall conduct preliminary inspections of no less than 20 percent of buildings containing six or more units where ...
NYC General Admin. Provisions 2014 > 1 Administration > 116 Inspections and Sign-Off of Completed Work > §28-116.2 Types of Inspections > *§28-116.2.1 Preliminary Inspection
109.2 Administration, Preliminary Inspection
Refer to Chapter 1 of Title 28 of the Administrative Code ...
110.2 Administration, Preliminary Inspection
Refer to Chapter 1 of Title 28 of the Administrative Code ...