// CODE SNIPPET
1926.702(c) Power Concrete Trowels
JUMP TO FULL CODE CHAPTER
Powered and rotating type concrete troweling machines that are manually guided shall be equipped with a control switch that will automatically shut off the power whenever the hands of the operator are removed from the equipment handles.
Related Code Sections
1926.702(c) Concrete and Masonry Construction, Power Concrete Trowels
Powered and rotating type concrete troweling machines that are manually guided shall be equipped with a control switch that will automatically shut ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.702 Requirements for Equipment and Tools > 1926.702(c) Power Concrete Trowels
1926.302(b)(4) Tools - Hand and Power,
and personal protective equipment which meets the requirements of Subpart E of this part. The 30 p.s.i. requirement does not apply for concrete form, mill ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.302 Power-Operated Hand Tools > 1926.302(b) Pneumatic Power Tools > 1926.302(b)(4)
1926.703(c)(5) Concrete and Masonry Construction,
failure of the power supply or lifting mechanism occurs ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.703 Requirements for Cast-In-Place Concrete > 1926.703(c) Vertical Slip Forms > 1926.703(c)(5)
1926.300(d)(5) Tools - Hand and Power,
Exception: This paragraph does not apply to concrete vibrators, concrete breakers, powered tampers, jack hammers, rock drills, and similar hand ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.300 General Requirements > 1926.300(d) Switches > 1926.300(d)(5)
1926.303(a) Tools - Hand and Power, Power
All grinding machines shall be supplied with sufficient power to maintain the spindle speed at safe levels under all conditions of normal operation ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.303 Abrasive Wheels and Tools > 1926.303(a) Power