UpCodes logo
Go To Full Code Chapter
Printing powders used in industrial additive manufacturing operations shall be tested for combustibility in accordance with NFPA 484 or NFPA 652 as applicable. A copy of test reports shall be provided to the fire code official upon request.

Related Code Sections

320.3.4 General Requirements, Powder Evaluation
Printing powders used in industrial additive manufacturing operations shall be tested for combustibility in accordance with NFPA 484 or NFPA 652 ...
Section 2406 Flammable Finishes, Powder Coating
Operations using finely ground particles of protective finishing material applied in dry powder form by a fluidized bed, an electrostatic fluidized ...
Section 2406 Flammable Finishes, Powder Coating
Operations using finely ground particles of protective finishing material applied in dry powder form by a fluidized bed, an electrostatic fluidized ...
502.7.6 Exhaust Systems, Powder Coating
Exhaust ventilation for powder-coating operations shall be sufficient to maintain the atmosphere below one-half of the minimum explosive ...
502.7.6 Exhaust Systems, Powder Coating
Exhaust ventilation for powder-coating operations shall be sufficient to maintain the atmosphere below one-half of the minimum explosive ...