// CODE SNIPPET
1926.701(c) Post-Tensioning Operations
JUMP TO FULL CODE CHAPTER
Related Code Sections
1926.701(c) Concrete and Masonry Construction, Post-Tensioning Operations
No employee (except those essential to the post-tensioning operations) shall be permitted to be behind the jack during tensioning operations ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.701 General Requirements > 1926.701(c) Post-Tensioning Operations
1926.1083 Commercial Diving Operations, Post-Dive Procedures
Note: The requirements applicable to construction work under this section are identical to those set forth at 1910.423 of this chapter. [58 FR ...
1926.964(b)(5) Electric Power Transmission and Distribution, Safe Operating Condition
Reelhandling equipment, including pulling and tensioning devices, shall be in safe operating condition and shall be leveled and aligned ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.964 Overhead Lines and Live-Line Barehand Work > 1926.964(b) Installing and Removing Overhead Lines > 1926.964(b)(5) Safe Operating Condition
1926.1407(g) Cranes & Derricks in Construction, Posting of Electrocution Warnings
There must be at least one electrocution hazard warning conspicuously posted in the cab so that it is in view of the operator and (except ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1407 Power Line Safety (Up to 350 KV)--Assembly and Disassembly > 1926.1407(g) Posting of Electrocution Warnings
1926.65(q)(11) Occupational Health and Environmental Controls, Post-Emergency Response Operations
Upon completion of the emergency response, if it is determined that it is necessary to remove hazardous substances, health hazards, and materials ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.65 Hazardous Waste Operations and Emergency Response > 1926.65(q) Emergency Response to Hazardous Substance Releases > 1926.65(q)(11) Post-Emergency Response Operations