// CODE SNIPPET
525.22 Portable Distribution or Termination Boxes
JUMP TO FULL CODE CHAPTER
Boxes shall be designed so that no live parts are exposed except when necessary for examination, adjustment, servicing, or maintenance by qualified persons. Where installed outdoors, the box shall be of weatherproof construction and mounted so that the bottom of the enclosure is not less than 150 mm (6 in.) above the ground.
Related Code Sections
525.22 Special Occupancies, Portable Distribution or Termination Boxes
Portable distribution or termination boxes shall comply with 525.22(A) through (D ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 525 Carnivals, Circuses, Fairs, and Similar Events > 525.22 Portable Distribution or Termination Boxes
110.28 General, Enclosure Types
, portable power distribution equipment, termination boxes, general-purpose transformers, fire pump controllers, fire pump motors, and motor controllers ...
National Electrical Code 2020 of Minnesota > 1 General > 110 Requirements for Electrical Installations > 110.28 Enclosure Types
520.62 Special Occupancies, Portable Power Distribution Units
to the terminations. Portable power distribution equipment fed ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.62 Portable Power Distribution Units
530.2 Special Occupancies, Definitions
that are insulated from each other for the purpose of splicing or distributing power to portable cables and cords that are terminated with single-pole busbar ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 530 Motion Picture and Television Studios and Similar Locations > 530.2 Definitions
(E) Wiring Methods and Materials, Power Distribution Blocks
the pull or junction boxes are used for conductors that do not terminate on the power distribution block(s), the through conductors shall be arranged ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.28 Pull and Junction Boxes and Conduit Bodies > (E) Power Distribution Blocks