// CODE SNIPPET
L 411.10.3 Pop-Up Type Sprinkler Heads
Go To Full Code Chapter
Where pop-up type sprinkler heads are installed, the sprinkler heads shall rise to a height above vegetation level and of not less than 4 inches (102 mm) above the soil level where emitting water.
Related Code Sections
L 411.10.3 Sustainable Practices, Pop-Up Type Sprinkler Heads
Where pop-up type sprinkler heads are installed, the sprinkler heads shall rise to a height above vegetation level and of not less than 4 inches (102 ...
P2711.3 Plumbing Fixtures, Lavatory Waste Outlets
Lavatories shall have waste outlets not less than 11/4 inch (32 mm) in diameter. A strainer, pop-up stopper, crossbar or other device shall ...
22.4.2.1.2 Special Occupancy Requirements,
Sprinkler systems protecting stacks and ducts that are subject to freezing shall be of a nonfreezing type or be a manually controlled open-head ...
8.6.2.2 Installation Requirements, Maximum Protection Area of Coverage
) Protection Areas and Maximum Spacing of Standard Pendent and Upright Spray Sprinklers for Ordinary Hazard Construction Type System Type ...
21.4 Alternative Sprinkler System Designs for Chapters 12 Through 20, Hose Stream Allowance and Water Supply Duration
Supply Duration Sprinkler Type Sprinkler Spacing Type Number of Sprinklers in Design Area Hose Stream Allowance Water Supply Duration ...