// CODE SNIPPET

10.2.4.7 Polypropylene (PP) and High-Density Polyethylene (HDPE)

Life Safety Code 2015 of Texas > 10 Interior Finish, Contents, and Furnishings > 10.2* Interior Finish > 10.2.4* Specific Materials > 10.2.4.7 Polypropylene (PP) and High-Density Polyethylene (HDPE)

Go To Full Code Chapter

Polypropylene and high-density polyethylene materials shall not be permitted as interior wall or ceiling finish unless the material complies with the requirements of 10.2.3.7.2. The tests shall be performed on a finished assembly and on the maximum thickness intended for use.

Related Code Sections

10.2.4.7 Interior Finish, Contents, and Furnishings, Polypropylene (PP) and High-Density Polyethylene (HDPE)

Polypropylene and high-density polyethylene materials shall not be permitted as interior wall or ceiling finish unless the material complies ...

Life Safety Code 2015 of Texas > 10 Interior Finish, Contents, and Furnishings > 10.2* Interior Finish > 10.2.4* Specific Materials > 10.2.4.7 Polypropylene (PP) and High-Density Polyethylene (HDPE)

12.5.5.7 Features of Fire Protection, Polypropylene (PP) and High-Density Polyethylene (HDPE)

Polypropylene and high-density polyethylene materials shall not be permitted as interior wall or ceiling finish unless the material complies ...

Fire Code 2015 of Texas > 12 Features of Fire Protection > 12.5* Interior Finish > 12.5.5* Specific Materials > 12.5.5.7 Polypropylene (PP) and High-Density Polyethylene (HDPE)

803.9 Interior Finishes, High-Density Polyethylene (HDPE) and Polypropylene (PP)

Where high-density polyethylene or polypropylene is used as an interior finish it shall comply with Section 803.1.2 ...

Building Code of the Texas Industrialized Housing and Buildings Program > 8 Interior Finishes > 803 Wall and Ceiling Finishes > 803.9 High-Density Polyethylene (HDPE) and Polypropylene (PP)

1210.4 Hydronic Piping, Piping and Tubing Materials Standards

High-density polyethylene (HDPE) ASTM D 2737; ASTM D 3035; ASTM F 714; AWWA C901; CSA B137.1; CSA C448; NSF 358-1 Polypropylene (PP-R) ASTM F ...

Mechanical Code of the Texas Industrialized Housing and Buildings Program > 12 Hydronic Piping > 1210 Plastic Pipe Ground-Source Heat Pump Loop Systems > 1210.4 Piping and Tubing Materials Standards

M2105.4 Hydronic Piping, Piping and Tubing Materials Standards

pipe ASTM F 1282; CSA B137.9; AWWA C 903 High-density polyethylene (HDPE) ASTM D 2737; ASTM D 3035; ASTM F 714; AWWA C901; CSA B137.1; CSA ...

Residential Code for one- and two-family dwellings of the Texas Industrialized Housing and Buildings Program > 21 Hydronic Piping > M2105 Ground-Source Heat-Pump System Loop Piping > M2105.4 Piping and Tubing Materials Standards