// CODE SNIPPET
1910.211(a)(1) Point of Operations
JUMP TO FULL CODE CHAPTER
Point of operations means that point at which cutting, shaping, boring, or forming is accomplished upon the stock.
Related Code Sections
1910.211(a)(1) Machinery and Machine Guarding, Point of Operations
Point of operations means that point at which cutting, shaping, boring, or forming is accomplished upon the stock ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(a) > 1910.211(a)(1) Point of Operations
1910.262(b)(27) Special Industries, Point of Operation
Point of operation shall mean that part of the machine where the work of cutting, shearing, squeezing, drawing, or manipulating the stock in any ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section > 1910.262(b)(27) Point of Operation
1910.217(c) Machinery and Machine Guarding, Safeguarding the Point of Operation
It shall be the responsibility of the employer to provide and insure the usage of "point of operation guards" or properly applied and adjusted point ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(c) Safeguarding the Point of Operation
1910.264(c) Special Industries, Point-Of-Operation Guards
[Reserved ...
OSHA 1910 General Industry > R Special Industries > 1910.264 Laundry Machinery and Operations > 1910.264(c) Point-Of-Operation Guards
1910.111(b)(13) Hazardous Materials, Tank Car Unloading Points and Operations
operations are performed by reliable persons properly instructed and given the authority to monitor careful compliance with all applicable procedures ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.111 Storage and Handling of Anhydrous Ammonia > 1910.111(b) Basic Rules > 1910.111(b)(13) Tank Car Unloading Points and Operations