// CODE SNIPPET
P3113.4.2 Pneumatic Sewage Ejectors
JUMP TO FULL CODE CHAPTER
The air pressure relief pipe from a pneumatic sewage ejector shall be connected to an independent vent stack terminating as required for vent extensions through the roof. The relief pipe shall be sized to relieve air pressure inside the ejector to atmospheric pressure, but shall be not less than 11/4 inches (32 mm) in size.
Related Code Sections
906.5.2 Vents, Pneumatic Sewage Ejectors
The air pressure relief pipe from a pneumatic sewage ejector shall be connected to an independent vent stack terminating as required for vent ...
Plumbing Code 2018 of Kansas > 9 Vents > 906 Vent Pipe Sizing > 906.5 Sump Vents > 906.5.2 Pneumatic Sewage Ejectors
P3113.4.2 Vents, Pneumatic Sewage Ejectors
The air pressure relief pipe from a pneumatic sewage ejector shall be connected to an independent vent stack terminating as required for vent ...
Residential Code 2018 of Kansas > 31 Vents > P3113 Vent Pipe Sizing > P3113.4 Sump Vents > P3113.4.2 Pneumatic Sewage Ejectors
Section 906 Vents, Vent Pipe Sizing
Building sump vent sizes for sumps with sewage pumps or sewage ejectors, other than pneumatic, shall be determined in accordance with Table 906.5.1 ...
712.4 Sanitary Drainage, Sewage Pumps and Sewage Ejectors
A sewage pump or sewage ejector shall automatically discharge the contents of the sump to the building drainage system ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 712 Sumps and Ejectors > 712.4 Sewage Pumps and Sewage Ejectors
P3007.4 Sanitary Drainage, Sewage Pumps and Sewage Ejectors
A sewage pump or sewage ejector shall automatically discharge the contents of the sump to the building drainage system ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3007 Sumps and Ejectors > P3007.4 Sewage Pumps and Sewage Ejectors