// CODE SNIPPET
1926.754(d) Plumbing-Up
JUMP TO FULL CODE CHAPTER
When deemed necessary by a competent person, plumbing-up equipment shall be installed in conjunction with the steel erection process to ensure the stability of the structure.
When used, plumbing-up equipment shall be in place and properly installed before the structure is loaded with construction material such as loads of joists, bundles of decking or bundles of bridging.
Plumbing-up equipment shall be removed only with the approval of a competent person.
Related Code Sections
1926.754(d) Steel Erection, Plumbing-Up
When deemed necessary by a competent person, plumbing-up equipment shall be installed in conjunction with the steel erection process to ensure ...
OSHA 1926 Construction > R Steel Erection > 1926.754 Structural Steel Assembly > 1926.754(d) Plumbing-Up
1926.1435(b)(5) Cranes & Derricks in Construction, Plumb Tolerance
Towers must be erected plumb to the manufacturer's tolerance and verified by a qualified person. Where the manufacturer does not specify plumb ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1435 Tower Cranes > 1926.1435(b) Erecting, Climbing and Dismantling > 1926.1435(b)(5) Plumb Tolerance
1926.1431(c) Cranes & Derricks in Construction, Equipment Set-Up
The equipment must be uniformly level, within one percent of level grade, and located on footing that a qualified person has determined ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1431 Hoisting Personnel > 1926.1431(c) Equipment Set-Up
1926.57(h)(7) Occupational Health and Environmental Controls, Make-Up Air
- Means for heating make-up air to any spray booth or room, before or at the time spraying ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.57 Ventilation > 1926.57(h) Spray Finishing Operations > 1926.57(h)(7) Make-Up Air
1926.57(h)(7)(iv) Occupational Health and Environmental Controls,
- Means for heating make-up air to any spray booth ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.57 Ventilation > 1926.57(h) Spray Finishing Operations > 1926.57(h)(7) Make-Up Air > 1926.57(h)(7)(iv)