// CODE SNIPPET
JUMP TO FULL CODE CHAPTER
Each cleanout fitting for cast-iron pipe shall consist of a cast-iron or copper alloy body and an approved plug. Each cleanout for galvanized wrought iron, galvanized steel, copper, or copper alloy pipe shall consist of a plug as specified in Table 707.1, or a standard weight copper alloy cap, or an approved ABS or PVC plastic plug, or an approved stainless steel cleanout or plug. Plugs shall have raised square heads or approved countersunk rectangular slots.
|SIZE OF PIPE |
|SIZE OF CLEANOUT |
|4 & larger||31/2||8|
For SI units: 1 inch = 25 mm
Related Code Sections
707.1 Sanitary Drainage, Plug
Each cleanout fitting for cast-iron pipe shall consist of a cast-iron or copper alloy body and an approved plug. Each cleanout for galvanized wrought ...
1115.4.2 Refrigeration, Fusible Plugs
Fusible plugs shall be marked with the melting temperatures in °F (°C). [ASHRAE 15:9.6.3] ...
2018 Uniform Mechanical Code of Nevada > 11 Refrigeration > 1115.0 Labeling and Identification > 1115.4 Marking of Pressure-Relief Devices > 1115.4.2 Fusible Plugs
1117.1.2 Refrigeration, Fusible Plug
Where a fusible plug is used to protect a pressure vessel having an inside diameter of 6 inches (152 mm) or less, the ultimate strength ...
2018 Uniform Mechanical Code of Nevada > 11 Refrigeration > 1117.0 Refrigerant-Containing Pressure Vessels > 1117.1 Inside Dimensions 6 Inches or Less > 1117.1.2 Fusible Plug
(B) Equipment for General Use, Attachment Plugs
Where used as permitted in 400.10(A)(3), (A)(6), and (A)(8), each flexible cord shall be equipped with an attachment plug and shall be energized from ...
National Electrical Code 2017 of Nevada > 4 Equipment for General Use > 400 Flexible Cords and Flexible Cables > 400.10 Uses Permitted > (B) Attachment Plugs