// CODE SNIPPET
D 109.3 Plastic
JUMP TO FULL CODE CHAPTER
Plastic piping shall only be used underground and shall meet the requirements of ASTM D2513 or ASTM D2517, as well as the design pressure and design limitations of 49 CFR (Section 192.123), and shall otherwise conform to the installation requirements thereof. [NFPA 501A:4.3.6.3]
Related Code Sections
1221.2.3 Hydronics, Plastics
Plastic pipe and tubing shall be installed in continuous lengths or shall be joined by heat fusion method ...
2018 Uniform Mechanical Code of Nevada > 12 Hydronics > 1221.0 Piping Installation > 1221.2 Embedded Piping Materials and Joints > 1221.2.3 Plastics
1403.8 Exterior Walls, Plastics
Plastic panel, apron or spandrel walls as defined in this code shall not be limited in thickness, provided that such plastics and their assemblies ...
1404.8 Exterior Walls, Plastics
Plastic panel, apron or spandrel walls as defined in this code shall not be limited in thickness, provided that such plastics and their assemblies ...
Chapter 26 Plastic
User note:
About this chapter: The use of plastics in building construction and components is addressed in Chapter 26. This chapter provides ...