// CODE SNIPPET
E3806.6 Plaster, Gypsum Board and Plasterboard
JUMP TO FULL CODE CHAPTER
Openings in plaster, gypsum board or plasterboard surfaces that accommodate boxes employing a flush-type cover or faceplate shall be made so that there are no gaps or open spaces greater than 1/8 inch (3.2 mm) around the edge of the box.
Related Code Sections
E3806.6 Power and Lighting Distribution, Plaster, Gypsum Board and Plasterboard
Openings in plaster, gypsum board or plasterboard surfaces that accommodate boxes employing a flush-type cover or faceplate shall be made so ...
2010 Residential Code of NY > 38 Power and Lighting Distribution > E3806 Installation of Boxes, Conduit Bodies and Fittings > E3806.6 Plaster, Gypsum Board and Plasterboard
Section 2507 Gypsum Board and Plaster, Lathing and Plastering
ACCESSORIES
MATERIAL STANDARD Accessories for gypsum veneer base ASTM C 1047 Blended cement ASTM C 595 Exterior plaster ...
Section 2507 Gypsum Board, Gypsum Panel Products and Plaster, Lathing and Plastering
C1157; C1600 Gypsum casting and molding plaster ASTM C59 Gypsum Keene's cement ASTM C61 Gypsum plaster ASTM C28 Gypsum veneer plaster ...
2020 Building Code of New York State > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2507 Lathing and Plastering
Section 2507 Gypsum Board, Gypsum Panel Products and Plaster, Lathing and Plastering
Exterior plaster bonding compounds ASTM C932 Hydraulic cement ASTM C1157; C1600 Gypsum casting and molding plaster ASTM C59 ...
Building Code 2015 of New York State > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2507 Lathing and Plastering