// CODE SNIPPET
719.2 Plaster Equivalents
Related Code Sections
719.2 Fire and Smoke Protection Features, Plaster Equivalents
For fire-resistance purposes, 1 / 2 inch (12.7 mm) of unsanded gypsum plaster shall be deemed equivalent to 3 / 4 inch (19.1 mm) of one ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 719 Fire-Resistance Requirements for Plaster > 719.2 Plaster Equivalents
(G) Equipment for General Use, Dry Board Installations
be completely filled with thermally conductive, nonshrinking plaster or other approved material or equivalent thermal conductivity ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.41 Ceiling Installation of Heating Cables on Dry Board, in Plaster, and on Concrete > (G) Dry Board Installations
2512.2 Gypsum Board, Gypsum Panel Products and Plaster, Plasticity Agents
or masonry cement is used, additional lime or plasticizers shall not be added. Hydrated lime or the equivalent amount of lime putty used as a plasticizer ...
Building Code 2018 of Illinois > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2512 Exterior Plaster > 2512.2 Plasticity Agents
7188.8.131.52 Fire and Smoke Protection Features, Finish on Nonfire-Exposed Side
Where plaster or gypsum wallboard is applied to the side of the wall not exposed to fire, the contribution of the finish to the total fire ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.3 Concrete Masonry > 722.3.2 Concrete Masonry Walls > 7184.108.40.206 Finish on Nonfire-Exposed Side