// CODE SNIPPET
A-402.7 Plant Inspection
JUMP TO FULL CODE CHAPTER
Where required by the provisions of the technical codes or regulations, materials or assemblies shall be inspected at the point of manufacture or fabrication in accordance with applicable provisions of the technical codes and Department procedures by a Special Inspector or Special Inspection Agency registered pursuant to Section 9-1306 of the Philadelphia Code.
Related Code Sections
A-402.7 Inspections, Plant Inspection
Where required by the provisions of the technical codes or regulations, materials or assemblies shall be inspected at the point of manufacture ...
Philadelphia Administrative Code > 4 Inspections > A-402 Permit Inspections > A-402.7 Plant Inspection
1703.5.2 Special Inspections and Tests, Inspection and Identification
The approved agency shall periodically perform an inspection, which shall be in-plant if necessary, of the product or material ...
2018 Philadelphia Building Code > 17 Special Inspections and Tests > 1703 Approvals > 1703.5 Labeling > 1703.5.2 Inspection and Identification