// CODE SNIPPET
704.1.2.3.6 Piping Outdoors
JUMP TO FULL CODE CHAPTER
Piping installed above ground, outdoors, shall be securely supported and located where it will be protected from physical damage. Piping passing through an exterior wall of a building shall be encased in a protective pipe sleeve. The annular space between the piping and the sleeve shall be sealed from the inside such that the sleeve is ventilated to the outdoors. Where passing through an exterior wall of a building, the piping shall be protected against corrosion by coating or wrapping with an inert material. Below-ground piping shall be protected against corrosion.
Related Code Sections
704.1.2.3.6 Gaseous Hydrogen Systems, Piping Outdoors
Piping installed above ground, outdoors, shall be securely supported and located where it will be protected from physical damage. Piping passing ...
Fuel Gas Code 2018 of Kansas > 7 Gaseous Hydrogen Systems > 704 (IFGC) Piping, Use and Handling > 704.1 Applicability > 704.1.2 Piping Systems > 704.1.2.3 Piping Design and Construction > 704.1.2.3.6 Piping Outdoors
G2415.9 Fuel Gas, (404.9) Above-Ground Piping Outdoors
Piping installed outdoors shall be elevated not less than 3 1 / 2 inches (89 mm) above ground and where installed across roof surfaces, shall ...
Residential Code 2018 of Kansas > 24 Fuel Gas > G2415 (404) Piping System Installation > G2415.9 (404.9) Above-Ground Piping Outdoors
P3103.1 Vents, Vent Pipes Terminating Outdoors
Vent pipes terminating outdoors shall be extended to the outdoors through the roof or a sidewall of the building in accordance with one ...
Residential Code 2018 of Kansas > 31 Vents > P3103 Vent Terminals > P3103.1 Vent Pipes Terminating Outdoors
404.9 Gas Piping Installations, Above-Ground Outdoor Piping
Piping installed outdoors shall be elevated not less than 3 1 / 2 inches (89 mm) above ground and where installed across roof surfaces, shall ...
Fuel Gas Code 2018 of Kansas > 4 Gas Piping Installations > 404 (IFGC) Piping System Installation > 404.9 Above-Ground Outdoor Piping
406.7.2.1 Gas Piping Installations, Purging Procedure
to the outdoors. The piping shall be purged with fuel gas and shall discharge to the indoors or outdoors through an appliance burner not located ...
Fuel Gas Code 2018 of Kansas > 4 Gas Piping Installations > 406 (IFGS) Inspection, Testing and Purging > 406.7 Purging > 406.7.2 Piping Systems Allowed to Be Purged Indoors or Outdoors > 406.7.2.1 Purging Procedure