// CODE SNIPPET
2308.5.8 Pipes in Walls
JUMP TO FULL CODE CHAPTER
Stud partitions containing plumbing, heating or other pipes shall be framed and the joists underneath spaced to provide proper clearance for the piping. Where a partition containing piping runs parallel to the floor joists, the joists underneath such partitions shall be doubled and spaced to permit the passage of pipes and shall be bridged. Where plumbing, heating or other pipes are placed in, or partly in, a partition, necessitating the cutting of the soles or plates, a metal tie not less than 0.058 inch (1.47 mm) (16 galvanized gage) and 11/2 inches (38 mm) in width shall be fastened to each plate across and to each side of the opening with not less than six 16d nails.
Related Code Sections
2308.5.8 Wood, Pipes in Walls
Stud partitions containing plumbing, heating or other pipes shall be framed and the joists underneath spaced to provide proper clearance ...
Building Code 2018 of Illinois > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.5 Wall Construction > 2308.5.8 Pipes in Walls
1810.3.5.3.4 Soils and Foundations, Steel Pipes and Tubes
for the selected hammer. Where a pipe or tube with wall thickness less than 0.179 inch (4.6 mm) is driven open ended, a suitable cutting shoe shall ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.5 Dimensions of Deep Foundation Elements > 1810.3.5.3 Steel > 1810.3.5.3.4 Steel Pipes and Tubes
(A) Wiring Methods and Materials, Support
not be permitted to come into contact with the messenger supports or any structural members, walls, or pipes ...
National Electrical Code 2017 of Illinois > 3 Wiring Methods and Materials > 396 Messenger-Supported Wiring > 396.30 Messenger > (A) Support
418.104.22.168.4 Special Detailed Requirements Based on Occupancy and Use, Corridors
Where HPM gases are transported in piping placed within the space defined by the walls of a corridor and the floor or roof above the corridor ...
Building Code 2018 of Illinois > 4 Special Detailed Requirements Based on Occupancy and Use > 415 Groups H-1, H-2, H-3, H-4 and H-5 > 415.11 Group H-5 > 415.11.7 Gas Detection Systems > 422.214.171.124 Where Required > 4126.96.36.199.4 Corridors