// CODE SNIPPET
H 501.6 Pipe Opening Sizes
JUMP TO FULL CODE CHAPTER
The inlet and outlet pipe openings shall not be larger in size than the connecting sewer pipe. The vertical leg of round inlet and outlet fittings shall not be less in size than the connecting sewer pipe nor less than 4 inches (100 mm) in diameter. A baffle-type fitting shall have the equivalent cross-sectional area of the connecting sewer pipe and not less than a 4 inch (102 mm) horizontal dimension where measured at the inlet and outlet pipe inverts.
Related Code Sections
H 501.6 Private Sewage Disposal Systems, Pipe Opening Sizes
The inlet and outlet pipe openings shall not be larger in size than the connecting sewer pipe. The vertical leg of round inlet and outlet fittings ...
2018 Uniform Plumbing Code of Nevada > H Private Sewage Disposal Systems > H 501.0 Septic Tank Construction > H 501.6 Pipe Opening Sizes
23.7.1* Plans and Calculations, General
The pipe schedule sizing provisions shall not apply to hydraulically calculated systems ...
Standard for the Installation of Sprinkler Systems 2016 of Nevada > 23 Plans and Calculations > 23.7 Pipe Schedules > 23.7.1* General
6.4.7 System Components and Hardware, Reducers and Bushings
Unless the requirements of 6.4.7.2 or 6.4.7.3 are met, a one-piece reducing fitting shall be used wherever a change is made in the size of the pipe ...
Standard for the Installation of Sprinkler Systems 2016 of Nevada > 6 System Components and Hardware > 6.4 Fittings > 6.4.7 Reducers and Bushings
1213.6.1 Fuel Gas Piping, Piping Systems Required to Be Purged Outdoors
sections of pipe or tubing meeting the size and length criteria of Table 1213.6.1. [NFPA 54:8.3.1] TABLE 1213.6.1 SIZE AND LENGTH OF PIPING [NFPA 54 ...
2018 Uniform Plumbing Code of Nevada > 12 Fuel Gas Piping > 1213.0 Pressure Testing, Inspection, and Purging > 1213.6 Purging Requirements > 1213.6.1 Piping Systems Required to Be Purged Outdoors
1313.6.1 Fuel Gas Piping, Piping Systems Required to Be Purged Outdoors
or tubing meeting the size and length criteria of Table 1313.6.1. [NFPA 54:8.3.1] TABLE 1313.6.1 SIZE AND LENGTH OF PIPING [NFPA 54: TABLE 8.3.1 ...
2018 Uniform Mechanical Code of Nevada > 13 Fuel Gas Piping > 1313.0 Pressure Testing and Inspection > 1313.6 Purging Requirements > 1313.6.1 Piping Systems Required to Be Purged Outdoors