// CODE SNIPPET
G2427.7.10 (503.7.10) Pipe Geometry
JUMP TO FULL CODE CHAPTER
Any shaped single-wall metal pipe shall be permitted to be used, provided that its equivalent effective area is equal to the effective area of the round pipe for which it is substituted, and provided that the minimum internal dimension of the pipe is not less than 2 inches (51 mm).
Related Code Sections
G2427.7.10 Fuel Gas, (503.7.10) Pipe Geometry
Any shaped single-wall metal pipe shall be permitted to be used, provided that its equivalent effective area is equal to the effective area ...
Residential Code 2018 of Kansas > 24 Fuel Gas > G2427 (503) Venting of Appliances > G2427.7 (503.7) Single-Wall Metal Pipe > G2427.7.10 (503.7.10) Pipe Geometry
503.7.10 Chimneys and Vents, Pipe Geometry
Any shaped single-wall metal pipe shall be permitted to be used, provided that its equivalent effective area is equal to the effective area ...
Fuel Gas Code 2018 of Kansas > 5 Chimneys and Vents > 503 (IFGS) Venting of Appliances > 503.7 Single-Wall Metal Pipe > 503.7.10 Pipe Geometry
6.1.3.2 Escalators and Moving Walks, Geometry
The width of the escalator shall be the width of the step tread. See 6.1.3.5.2 for step width requirements ...
Safety Code for Elevators and Escalators 2016 of Kansas > 6 Escalators and Moving Walks > 6.1 Escalators > 6.1.3 Construction Requirements > 6.1.3.2 Geometry
6.2.3.2 Escalators and Moving Walks, Geometry
The width of the moving walk shall be the width of the exposed tread (see 6.2.3.7 ...
Safety Code for Elevators and Escalators 2016 of Kansas > 6 Escalators and Moving Walks > 6.2 Moving Walks > 6.2.3 Construction Requirements > 6.2.3.2 Geometry
6.3.2 Structural Analysis, T-Beam Geometry
For prestressed T-beams, it shall be permitted to use the geometry provided by 6.3.2.1 and 6.3.2.2 ...
Building Code Requirements for Structural Concrete of Kansas > 6 Structural Analysis > 6.3 Modeling Assumptions > 6.3.2 T-Beam Geometry