// CODE SNIPPET
520.74 Pilot Lights Required
JUMP TO FULL CODE CHAPTER
Each switch required in 520.73 shall be provided with a pilot light located outside of and adjacent to the door of the room being controlled to indicate when the circuit is energized. Each pilot light shall be permanently identified indicating a description of the circuit controlled. Pilot lights shall be neon, LED, or other extended-life lamp. Pilot lights shall be recessed or provided with a mechanical guard.
Related Code Sections
520.74 Special Occupancies, Pilot Lights Required
Each switch required in 520.73 shall be provided with a pilot light located outside of and adjacent to the door of the room being controlled ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.74 Pilot Lights Required
R404.1 [RE] Residential Energy Efficiency, Lighting Equipment (Mandatory)
of the permanently installed lighting fixtures shall contain only high efficacy lamps. Exception: Low-voltage lighting shall not be required to utilize high ...
Minnesota Energy Code 2015 > 4 [RE] Residential Energy Efficiency > R404 Electrical Power and Lighting Systems (Mandatory) > R404.1 Lighting Equipment (Mandatory)
1603.1 Installation and Testing of Oil or Liquid Fuel-Fired Equipment, Pilot Operation
Igniter or pilot flames shall be effective to ignite the oil or liquid fuel at the main burner or burners and shall be adequately protected from ...
Minnesota Mechanical Code 2015 > 16 Installation and Testing of Oil or Liquid Fuel-Fired Equipment > 1603 > 1603.1 Pilot Operation
8.14 Installation Requirements, Pilot Line Detectors
a ceiling, pilot sprinklers shall be positioned in accordance with the requirements of Section 8.6 ...
Standard for the Installation of Sprinkler Systems 2016 of Minnesota > 8 Installation Requirements > 8.14 Pilot Line Detectors