// CODE SNIPPET
1910.261(d)(3) Piling and Unpiling Pulp
JUMP TO FULL CODE CHAPTER
Piles of wet lap pulp (unless palletized) shall be stepped back one-half the width of the sheet for each 8 feet of pile height. Sheets of pulp shall be interlapped to make the pile secure. Pulp shall not be piled over pipelines to jeopardize pipes, or so as to cause overloading of floors, or to within 18 inches below sprinkler heads.
Floor capacities shall be clearly marked on all floors.
Piles of pulp shall not be undermined when being unpiled.
Related Code Sections
1910.261(d)(3) Special Industries, Piling and Unpiling Pulp
Piles of wet lap pulp (unless palletized) shall be stepped back one-half the width of the sheet for each 8 feet of pile height. Sheets of pulp shall ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(d) Handling and Storage of Raw Materials Other Than Pulpwood or Pulp Chips > 1910.261(d)(3) Piling and Unpiling Pulp
1910.265(b)(22) Special Industries, Lift Truck
in the form of forks, for piling or unpiling lumber units or packages ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(b) Definitions Applicable to This Section > 1910.265(b)(22) Lift Truck
1910.261(c)(14) Special Industries, Removal of Pulpwood
The ends of a woodpile shall be properly sloped and cross-tiered into the pile. Upright poles shall not be used at the ends of woodpiles. To knock ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(c) Handling and Storage of Pulpwood and Pulp Chips > 1910.261(c)(14) Removal of Pulpwood
1910.261 Special Industries, Pulp, Paper, and Paperboard Mills
Piles of pulp shall not be undermined when being unpiled ...
1910.261(i)(1) Special Industries, Pulp Grinders
Water wheels directly connected to pulp grinders shall be provided with speed governors limiting the peripheral speed of the grinder ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(i) Mechanical Pulp Process > 1910.261(i)(1) Pulp Grinders