// CODE SNIPPET
11-16 Pierhead Lines, Bulkhead Lines and Marginal Streets
JUMP TO FULL CODE CHAPTER
The pierhead and bulkhead lines shown on the zoning maps shall be the lines adopted by the United States Army Corps of Engineers, except where a New York City pierhead or bulkhead line is adopted, in which case the New York City line shall be the governing line for the purposes of this Resolution. In the event a provision of this Resolution refers to a pierhead or bulkhead line and no such line is shown on the zoning map, then the shoreline shall control.
Marginal streets, ways, places or wharves shown on the zoning maps shall not be deemed to be streets for the purposes of this Resolution, unless expressly stated otherwise.
Related Code Sections
1509.2 Roof Assemblies and Rooftop Structures, Bulkheads and Penthouses
Bulkheads and penthouses shall comply with the construction requirements of Section 1509.2 ...
NYC Building Code 2014 > 15 Roof Assemblies and Rooftop Structures > 1509 Rooftop Structures > 1509.2 Bulkheads and Penthouses
1509.2 Roof Assemblies and Rooftop Structures, Bulkheads and Penthouses
Bulkheads and penthouses shall comply with the construction requirements of Section 1509.2 ...
NYC Building Code 2008 > 15 Roof Assemblies and Rooftop Structures > 1509 Rooftop Structures > 1509.2 Bulkheads and Penthouses
Reference Standard 16 Plumbing and Gas Piping [PDF] (page 46)
storm sewer from the street line to, and including the spur connection at the street sewer shall be obtained in accordance with the requirements ...
1704.6.1 Structural Tests and Special Inspections, Fabrication of High-Load Diaphragms
and length, the number of fastener lines and that spacing between fasteners in each line and at edge margins agrees with the approved construction documents ...
NYC Building Code 2008 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.6 Wood Construction > 1704.6.1 Fabrication of High-Load Diaphragms
1704.6.1 Structural Tests and Special Inspections, High-Load Diaphragms
diameter and length, the number of fastener lines and that the spacing between fasteners in each line and at edge margins agrees with the approved ...
NYC Building Code 2014 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.6 Wood Construction > 1704.6.1 High-Load Diaphragms