// CODE SNIPPET
1910.1001(f)(1)(v) Particular Tools
JUMP TO FULL CODE CHAPTER
All hand-operated and power-operated tools which would produce or release fibers of asbestos, such as, but not limited to, saws, scorers, abrasive wheels, and drills, shall be provided with local exhaust ventilation systems which comply with paragraph (f)(1)(iv) of this section.
Related Code Sections
1910.1001(f)(1)(v) Toxic and Hazardous Substances, Particular Tools
All hand-operated and power-operated tools which would produce or release fibers of asbestos, such as, but not limited to, saws, scorers, abrasive ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1001 Asbestos > 1910.1001(f) Methods of Compliance > 1910.1001(f)(1) Engineering Controls and Work Practices > 1910.1001(f)(1)(v) Particular Tools
1910.266(i)(5) Special Industries, Portability of Training
Each current employee who has received training in the particular elements specified in paragraph (i)(3) of this section shall not be required ...
OSHA 1910 General Industry > R Special Industries > 1910.266 Logging Operations > 1910.266(i) Training > 1910.266(i)(5) Portability of Training
1910.241(a)(7) Hand and Portable Powered Tools and Other Hand-Held Equipment, Tool
An explosive-actuated fastening tool, unless otherwise indicated, and all accessories pertaining thereto ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.241 Definitions > 1910.241(a) Explosive-Actuated Fastening Tool Terms > 1910.241(a)(7) Tool
1910.211(d)(58) Machinery and Machine Guarding, Unitized Tooling
Unitized tooling means a type of die in which the upper and lower members are incorporated into a self-contained unit so arranged as to hold the die ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(d) > 1910.211(d)(58) Unitized Tooling
1910.217(d)(5) Machinery and Machine Guarding, Unitized Tooling
If unitized tooling is used, the opening between the top of the punch holder and the face of the slide, or striking pad, shall be safeguarded ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(d) Design, Construction, Setting and Feeding of Dies > 1910.217(d)(5) Unitized Tooling