// CODE SNIPPET
(E) Parallel Installation
Related Code Sections
(1) Wiring Methods and Materials, Paralleled Installations
within the same raceway, auxiliary gutter, cable tray, trench, cable, or cord shall apply separately to each portion of the paralleled installation ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.3 Conductors > (B) Conductors of the Same Circuit > (1) Paralleled Installations
(E) Special Conditions, Parallel Installation
Transfer equipment and electric power production systems installed to permit operation in parallel with the normal source shall also meet ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 702 Optional Standby Systems > 702.5 Transfer Equipment > (E) Parallel Installation
(E) Equipment for General Use, Generators Installed in Parallel
Where a generator is installed in parallel with other generators, the provisions of 445.18(A) shall be capable of isolating the generator output ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 445 Generators > 445.18 Disconnecting Means and Emergency Shutdown > (E) Generators Installed in Parallel
(B) Wiring Methods and Materials, Cable Installed Parallel to Framing Members
Where the cable is installed parallel to the sides of rafters, studs, or ceiling or floor joists, neither guard strips nor running boards shall ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 320 Armored Cable: Type AC > 320.23 In Accessible Attics > (B) Cable Installed Parallel to Framing Members
(2) Wiring and Protection, Size for Parallel Conductor Installations in Two or More Raceways or Cables
Where the ungrounded supply conductors are paralleled in two or more raceways or cables, and an individual supply-side bonding jumper is used ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.102 Grounded Conductor, Bonding Conductors, and Jumpers > (C) Size — Supply-Side Bonding Jumper > (2) Size for Parallel Conductor Installations in Two or More Raceways or Cables