// CODE SNIPPET
1910.334(b)(3) Overcurrent Protection Modification
JUMP TO FULL CODE CHAPTER
Overcurrent protection of circuits and conductors may not be modified, even on a temporary basis, beyond that allowed by 1910.304(e), the installation safety requirements for overcurrent protection.
Related Code Sections
1910.334(b)(3) Electrical, Overcurrent Protection Modification
Overcurrent protection of circuits and conductors may not be modified, even on a temporary basis, beyond that allowed by 1910.304(e ...
OSHA 1910 General Industry > S Electrical > 1910.334 Use of Equipment > 1910.334(b) Electric Power and Lighting Circuits > 1910.334(b)(3) Overcurrent Protection Modification
1910.304(f) Electrical, Overcurrent Protection
The following requirements apply to overcurrent protection of circuits rated 600 volts, nominal, or less ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring Design and Protection > 1910.304(f) Overcurrent Protection
1910.179(b)(3) Materials Handling and Storage, Modifications
Cranes may be modified and rerated provided such modifications and the supporting structure are checked thoroughly for the new rated load ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(b) General Requirements > 1910.179(b)(3) Modifications
1910.217(e)(2) Machinery and Machine Guarding, Modification
It shall be the responsibility of any person modifying a power press to furnish instructions with the modification to establish new or changed ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(e) Inspection, Maintenance, and Modification of Presses > 1910.217(e)(2) Modification
1910.304(f)(2)(iv)(B) Electrical,
Conductors tapped to a feeder may be protected by the feeder overcurrent device where that overcurrent device also protects the tap conductor ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring Design and Protection > 1910.304(f) Overcurrent Protection > 1910.304(f)(2) Feeders and Branch Circuits Over 600 Volts, Nominal > 1910.304(f)(2)(iv) The Following Additional Requirements Apply to Feeders Only: > 1910.304(f)(2)(iv)(B)