// CODE SNIPPET
1910.268(n)(7) Outside Work Platforms
JUMP TO FULL CODE CHAPTER
Unless adequate railings are provided, safety straps and body belts shall be used while working on elevated work platforms such as aerial splicing platforms, pole platforms, ladder platforms and terminal balconies.
Related Code Sections
1910.268(n)(7) Special Industries, Outside Work Platforms
Unless adequate railings are provided, safety straps and body belts shall be used while working on elevated work platforms such as aerial splicing ...
OSHA 1910 General Industry > R Special Industries > 1910.268 Telecommunications > 1910.268(n) Overhead Lines > 1910.268(n)(7) Outside Work Platforms
1910.67(a)(7) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Platform
Any personnel-carrying device (basket or bucket) which is a component of an aerial device ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.67 Vehicle-Mounted Elevating and Rotating Work Platforms > 1910.67(a) Definitions Applicable to This Section > 1910.67(a)(7) Platform
1910.66(e)(4) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Equipment Stops
Operational areas for trackless type equipment shall be provided with structural stops, such as curbs, to prevent equipment from traveling outside ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(e) Powered Platform Installations-Affected Parts of Buildings > 1910.66(e)(4) Equipment Stops
1910.262(l)(2) Special Industries, Benches or Working Platforms
Branches or working platforms approximately 10 inches in height and 8 inches in width should be installed along the entire running length ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(l) Heavy Draw Boxes, Finishers, and Speeders Used in Worsted Drawing > 1910.262(l)(2) Benches or Working Platforms
1910.68(c)(3) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Platforms or Steps
Steps or platforms shall be not less than 12 inches nor more than 14 inches deep, measured from the belt to the edge of the step or platform ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(c) Mechanical Requirements > 1910.68(c)(3) Platforms or Steps