// CODE SNIPPET
1910.252(c)(4)(iv) Outside Helper
JUMP TO FULL CODE CHAPTER
Where welding operations are carried on in confined spaces and where welders and helpers are provided with hose masks, hose masks with blowers or self-contained breathing equipment approved by the Mine Safety and Health Administration and the National Institute for Occupational Safety and Health, a worker shall be stationed on the outside of such confined spaces to insure the safety of those working within.
Related Code Sections
1910.252(c)(4)(iv) Welding, Cutting, and Brazing, Outside Helper
Where welding operations are carried on in confined spaces and where welders and helpers are provided with hose masks, hose masks with blowers ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation > 1910.252(c)(4) Ventilation in Confined Spaces > 1910.252(c)(4)(iv) Outside Helper
1910.261(l)(6)(i) Special Industries,
Each guillotine-type cutter shall be equipped with a control which requires the operator and his helper, if any, to use both hands to engage ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(l) Finishing Room > 1910.261(l)(6) Guillotine-Type Cutters > 1910.261(l)(6)(i)
1910.261(l)(6) Special Industries, Guillotine-Type Cutters
Each guillotine-type cutter shall be equipped with a control which requires the operator and his helper, if any, to use both hands to engage ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(l) Finishing Room > 1910.261(l)(6) Guillotine-Type Cutters
1910.252(b)(1) Welding, Cutting, and Brazing, General
A welder or helper working on platforms, scaffolds, or runways shall be protected against falling. This may be accomplished by the use of railings ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(b) Protection of Personnel > 1910.252(b)(1) General
1910.261(c)(5) Special Industries, Handling Pulpwood From Trucks
before the binder chains are released. The hooker shall see that the helper is clear before signaling for the movement of the load ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(c) Handling and Storage of Pulpwood and Pulp Chips > 1910.261(c)(5) Handling Pulpwood From Trucks