// CODE SNIPPET
1910.145(f)(9) Other Tags
JUMP TO FULL CODE CHAPTER
Other tags may be used in addition to those required by this paragraph (f), or in other situations where this paragraph (f) does not require tags, provided that they do not detract from the impact or visibility of the signal word and major message of any required tag.
[61 FR 5507, Feb. 13, 1996; 61 FR 9227, March 7, 1996; 76 FR 24698, May 2, 2011; 78 FR 35566, June 13, 2013]
[61 FR 5507, Feb. 13, 1996; 61 FR 9227, March 7, 1996; 76 FR 24698, May 2, 2011; 78 FR 35566, June 13, 2013]
Related Code Sections
1910.145(f)(9) General Environmental Controls, Other Tags
Other tags may be used in addition to those required by this paragraph (f), or in other situations where this paragraph (f) does not require tags ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.145 Specifications for Accident Prevention Signs and Tags > 1910.145(f) Accident Prevention Tags > 1910.145(f)(9) Other Tags
1910.23(b)(10) Walking-Working Surfaces,
Any ladder with structural or other defects is immediately tagged "Dangerous: Do Not Use" or with similar language in accordance with ยง 1910.145 ...
OSHA 1910 General Industry > D Walking-Working Surfaces > 1910.23 Ladders > 1910.23(b) General Requirements for All Ladders > 1910.23(b)(10)
1910.155(c)(3)(iv)(D) Fire Protection,
, and if it bears a label, tag, or other record of certification ...
OSHA 1910 General Industry > L Fire Protection > 1910.155 Scope, Application and Definitions Applicable to This Subpart > 1910.155(c) Definitions Applicable to This Subpart > 1910.155(c)(3) Approved > 1910.155(c)(3)(iv) > 1910.155(c)(3)(iv)(D)
1910.269(q)(4)(ii) Special Industries,
The employer shall ensure that employees use tag lines or other similar devices to maintain control of tower sections being raised or positioned ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(q) Overhead Lines and Live-Line Barehand Work > 1910.269(q)(4) Towers and Structures > 1910.269(q)(4)(ii)
1910.252(c)(1)(v)(B) Welding, Cutting, and Brazing,
, as a minimum, on tags, boxes, or other containers:
Do not use in areas without adequate ventilation. See ANSI Z49.1-1967 Safety in Welding, Cutting ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c)(1) General > 1910.252(c)(1)(v) > 1910.252(c)(1)(v)(B)