In addition to the requirements of paragraph (C)(2)(903.2) of this rule, the provisions indicated in Table 903.2.11.6 of this rule also require the installation of a fire suppression system for certain buildings and areas.
TABLE 903.2.11.6
ADDITIONAL REQUIRED FIRE EXTINGUISHING SYSTEMS
| SECTION | SUBJECT |
| 914.2.1 | Covered malls |
| 914.3.1 | High rise buildings |
| 914.4.1 | Atriums |
| 914.5.1 | Underground structures |
| 914.6.1 | Stages |
| 914.7.1 | Special amusement buildings |
| 914.8.2, 914.8.5 | Aircraft hangars |
| 914.9 | Flammable finishes |
| 914.10 | Drying rooms |
| 914.11.1 | Group B ambulatory heatlh care facilities |
| 1024.6.2.3 | Smoke-protected seating |
| 1208.2 | Dry cleaning plants |
| 1208.3 | Dry cleaning machines |
| 1504.2 | Spray finishing in Group A, E, I or R |
| 1504.4 | Spray booths and spray rooms |
| 1505.2 | Dip-tank rooms in Group A, I or R |
| 1505.4.1 | Dip tanks |
| 1505.9.4 | Hardening and tempering tanks |
| 1803.10 | HPM facilities |
(continued)
TABLE 903.2.11.6—continued
ADDITIONAL REQUIRED FIRE SUPPRESSION SYSTEMS
| SECTION | SUBJECT |
| 1803.10.1.1 | HPM work station exhaust |
| 1803.10.2 | HPM gas cabinets and exhausted enclosures |
| 1803.10.3 | HPM exit access corridor |
| 1803.10.4 | HPM exhaust ducts |
| 1803.10.4.1 | HPM noncombustible ducts |
| 1803.10.4.2 | HPM combustible ducts |
| 1907.3 | Lumber production conveyor enclosures |
| 1908.7 | Recycling facility conveyor enclosures |
| 2106.1 | Class A and B ovens |
| 2106.2 | Class C and D ovens |
| 2209.3.2.6.2 | Hydrogen motor fuel-dispensing area canopies |
| Table 2306.2 | Storage fire protection |
| 2306.4 | Storage |
| 2703.8.4.1 | Gas rooms |
| 2703.8.5.3 | Exhausted enclosures |
| 2704.5 | Indoor storage of hazardous materials |
| 2705.1.8 | Indoor dispensing of hazardous materials |
| 2804.4.1 | Aerosol warehouses |
| 2806.3.2 | Aerosol display and merchandising areas |
| 2904.5 | Storage of more than 1,000 cubic feet of loose combustible fibers |
| 3306.5.2.1 | Storage of smokeless propellant |
| 3306.5.2.3 | Storage of small arms primers |
| 3404.3.7.5.1 | Flammable and combustible liquid storage rooms |
| 3404.3.8.4 | Flammable and combustible liquid storage warehouses |
| 3405.3.7.3 | Flammable and combustible liquid Group H-2 or H-3 areas |
| 3704.1.2 | Gas cabinets for highly toxic and toxic gas |
| 3704.1.3 | Exhausted enclosures for highly toxic and toxic gas |
| 3704.2.2.6 | Gas rooms for highly toxic and toxic gas |
| 3704.3.3 | Outdoor storage for highly toxic and toxic gas |
| 4204.1.1 | Pyroxylin plastic storage cabinets |
| 4204.1.3 | Pyroxylin plastic storage vaults |
| 4204.2 | Pyroxylin plastic storage and manufacturing |
| 4603.4.1 | Pyroxylin plastic storage in existing buildings |
| 4603.4.2 | Existing Group I-2 occupancies |
| The building code as listed in rule 1301:7-7-47 of the Administrative Code | Sprinkler system requirements as set forth in section 903.2.11.6 of the building code as listed in rule 1301:7-7-47 of the Administrative Code |
For SI: 1 cubic foot = 0.023 m3.